SKU: GCX-GRCL38T3553
- Eye grid clamp with 3/8" thread
- M12 locking bolt with butterfly nut
- Opening diameters: 38 mm - 52 mm
- Fully metal made
- Size: 12 x 6 x 3 cm | 0.27 kg
Runway Roller Stand Base
€2900
Low profile roller stand designed for mounting heavy lighting fixtures or other studio equipment like fog or wind machines very close to the floor.
The base is equipped with a removable short stand column with top 16 mm spigot.
The solid construction of the one-piece thick metal cast base is sturdy enough to sustain up to 10 kg loads.
The dense rubber wheels ensure a smooth and silent rolling on most studio surfaces.
Q & A ( 0 )
Ask a question
Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
SKU: LHA-15CABLE18KW
- Connects the lamp head to ballast
- Length: 15m
- For HMI 12KW/18KW fixtures
SKU: GGX-GRIPHEADLEVB
- Jaws diameters: 16/12/8/4 mm
- Sturdy cast aluminum body
- "V" jaws with toothed design for extra grip
- Locking lever & bearings for max torque
- Fits short and lock neck 16mm spigots
- Size: 17 x 16 x 6 cm | 0.6 kg
SKU: GCX-REFLCLAMP
- For mounting reflector panels on stand
- Metallic spigot receiver 5/8"
- Suitable for baby stands w/ 16mm spigot
- Plastic grip with strong spring mechanism
- Size: 5.5 x 7.5 cm | 0.12 kg
SKU: SHX-PANTOGR40200
- Stepless extensible from 40 to 200 cm
- Maximum payload 10kg using only the friction device
- Spigot 16mm receiver on both ends
- Cable guiders on pantograph's edge
- Includes track runner with bearing wheels
SKU: SBX-BOOMARMECCS
- Telescopic boom arm: 120 to 220 cm
- Stand maximum height: 175 cm
- Material: aluminum with black finish
- Counterweight 5kg
- Material: aluminum & steel
SKU: SHX-CELFIXPLATE
- Metal bracket for studio rails
- Attaches the rail to the concrete ceiling
SKU: GCX-CCLAMP
- Opens up to 45 mm
- Used for hanging lighting fixtures to truss pipes
- 16 mm spigot (5/8" pin)
- Metal made with rubberized contact surface
- Size: 8.5 x 4.5 x 4.5 cm | 0.39 kg
- Payload: 30 kg
SKU: LLA-SKIRTMAXLED4
- black, opaque skirt
- white, diffusion skirt
- white, diffusion bottom
- diameter:
- pop-up folding system
SKU: GCX-GRIDCL58P
- Opening diameters: 38 mm - 52 mm
- Grid clamp / truss eye coupler
- M12 locking bolt with butterfly nut
- Spigot 16 mm (5/8")
- Interior rubberized surface
- Fully metal made
- Spigot length: 70 mm
- Size: 11.5 x 6 x 3 cm | 0.37 kg
- Payload: 25 Kg
English
Română 
Deutsch 
Français 
Italiano 
Nederlands 
Español 
AV
From Antonio Valverde
07/29/2019
surprisingly proper tool
Simple and efficient ,heavy and robust. It may be a lttle rough on the surface but functionally no problems to report. Maybe the fact that the spigot is replaceble and can be swapped with a stronger one. Arrived safe among other products just in time for some tests in a new studio.