|
|
The Cinelight DayLED 600
uses 600 ultra bright, 5400K LED bulbs which produce luminous,
directional lighting, having an equivalent output of a tungsten 650 watts light, yet drawing just 36 watts. The 600 daylight balanced
LED's offer full spectrum, beautifully soft light with a significantly
further throw than a comparable fluorescent light because each of the
600 LED bulbs focuses the 5400K beam to a 60 degree angle that directs
light forward. This beam angle creates a beam pattern that is useful
from 1 to 7 meters.
DayLED 600 is ideal for location work because it can be operated from
AC power (100-240V) or from a DC 15V battery. On the back panel
there is a built-in V-Mount battery plate that accepts Sony type Li-Ion
batteries to power the light. A 165Wh battery can power up the light up
to 4.5h making it handy to use in remote location where power
is limited or unavailable. News crews and event videographers may find
this feature very useful.
The output is dimmable from 100% to 10%, maintaining a constant
color temperature across the entire dimming range. A wired-dimmer can
be connected to the remote dimming port from the back panel to control
the output when the fixture is hanged in the air or similar situations when
the dimmer knob cannot be easily reached to. The wired-dimmer is
available as an optional accessory. With the optional radio remote you can control up to 4 independent units or groups (unlimited units in each group). This feature is very handy for large studios or when the LED panels are mounted high above.
The package includes three acrylic filter panels: one full CTO
conversion filter that converts the color temperature of the LED's from
5400K to 3200K (warm) so the DayLED 600 can be used with tungsten
lights, one diffusion filter that will soften the shadows and one correction filter (magenta color, also known as minus green filter). The
filters slide in front of the LED's, in an accessory holder.
The
advantage of LED lights over other lights is that they are small,
lightweight, put out a lot of light and use very little electricity,
which makes
them perfect in all lighting situations.
Key Features:
- 5400K daylight balanced high output LED's - C.R.I > 85 RA (new generation, improved)
- 50'000h led life - LED's beam angle: 45 degree (semi-flood) - high output: 1m: 6000lx | 2m: 1850lx | 3m: 900lx
- universal voltage input: 100-240V / 50-60Hz
- multiple power input options: AC, DC 15V or battery (V-Lock Sony type)
- low power consumption, draws only 36 watts
- dimming range from 100% down to 10%
- remote dimming port - built-in 4 leaf barndoors - includes three acrylic filter panels: full CTO conversion 5400K to 3200K (warm), diffusion and correction (minus green)
- the hammered reflector on barndoors prevents the appearance of hot spots and creates an even beam field
- perforated body design that ensures proper ventilation keeping the fixture's temperature low and prolong LED's life
- lightweight and solid aluminum housing, weights only 2.1 kg
- slim design, only 6cm thickness ( 36W x 40H x 6L cm)
- black powder coated aluminum housing, scratch resistant
Package content:
1 x DayLED 600
1 x AC-DC power adapter
1 x power cable with in-line on/off switch
3 x acrylic filters (warm, correction, diffusion)
1 x yoke bar with 5/8" receiver
1 x user manual
Guarantee: 1 year
| source type |
led - flood |
| power |
35 watts |
| voltage |
DC 14.8V / AC 100-240V |
| color temperature |
5400K |
| beam angle degree |
45 |
| illuminance |
1m: 6000 lx | 2m: 1850 lx | 3m: 900 lx |
| number of LED |
600 |
| DMX 512 controller |
no |
| dimming range |
100%-10% |
| battery mount |
V-Lock |
| mounting |
spigot 16mm (5/8" receiver) |
| power cable lenght |
3.5 meters |
| power plug type |
CEE 7/7 |
| lamp head dimmensions (HxWxL) mm |
360 x 400 x 60 |
| weight |
1.2 kg |
| material |
aluminum |
| color |
black |
| protection class |
- |
| compliance |
CE |
DayLED 600 - 5400K [LLS-DAYLED600]LLS-DAYLED600
419€
Review by Antony Andrew
Very powerful LED light!! Well built and incredible light! Aluminum housing and hard powder coated. Personally I use a minus 1/4 green correction filter when using with other fluorescent lights (kino flo diva 400 with kino lamps). When using only DayLED600 no need for correction. I mostly use this light for on location shooting and power it from 160Wh battery. The brightness is constant until battery dies.
The Cinelight DayLED 600
uses 600 ultra bright, 5400K LED bulbs which produce luminous,
directional lighting, having an equivalent output of a tungsten 650 watts light, yet drawing just 36 watts. The 600 daylight balanced
LED's offer full spectrum, beautifully soft light with a significantly
further throw than a comparable fluorescent light because each of the
600 LED bulbs focuses the 5400K beam to a 60 degree angle that directs
light forward. This beam angle creates a beam pattern that is useful
from 1 to 7 meters.
DayLED 600 is ideal for location work because it can be operated from
AC power (100-240V) or from a DC 15V battery. On the back panel
there is a built-in V-Mount battery plate that accepts Sony type Li-Ion
batteries to power the light. A 165Wh battery can power up the light up
to 4.5h making it handy to use in remote location where power
is limited or unavailable. News crews and event videographers may find
this feature very useful.
The output is dimmable from 100% to 10%, maintaining a constant
color temperature across the entire dimming range. A wired-dimmer can
be connected to the remote dimming port from the back panel to control
the output when the fixture is hanged in the air or similar situations when
the dimmer knob cannot be easily reached to. The wired-dimmer is
available as an optional accessory. With the optional radio remote you can control up to 4 independent units or groups (unlimited units in each group). This feature is very handy for large studios or when the LED panels are mounted high above.
The package includes three acrylic filter panels: one full CTO
conversion filter that converts the color temperature of the LED's from
5400K to 3200K (warm) so the DayLED 600 can be used with tungsten
lights, one diffusion filter that will soften the shadows and one correction filter (magenta color, also known as minus green filter). The
filters slide in front of the LED's, in an accessory holder.
The
advantage of LED lights over other lights is that they are small,
lightweight, put out a lot of light and use very little electricity,
which makes
them perfect in all lighting situations.
Key Features:
- 5400K daylight balanced high output LED's - C.R.I > 85 RA (new generation, improved)
- 50'000h led life - LED's beam angle: 45 degree (semi-flood) - high output: 1m: 6000lx | 2m: 1850lx | 3m: 900lx
- universal voltage input: 100-240V / 50-60Hz
- multiple power input options: AC, DC 15V or battery (V-Lock Sony type)
- low power consumption, draws only 36 watts
- dimming range from 100% down to 10%
- remote dimming port - built-in 4 leaf barndoors - includes three acrylic filter panels: full CTO conversion 5400K to 3200K (warm), diffusion and correction (minus green)
- the hammered reflector on barndoors prevents the appearance of hot spots and creates an even beam field
- perforated body design that ensures proper ventilation keeping the fixture's temperature low and prolong LED's life
- lightweight and solid aluminum housing, weights only 2.1 kg
- slim design, only 6cm thickness ( 36W x 40H x 6L cm)
- black powder coated aluminum housing, scratch resistant
Package content:
1 x DayLED 600
1 x AC-DC power adapter
1 x power cable with in-line on/off switch
3 x acrylic filters (warm, correction, diffusion)
1 x yoke bar with 5/8" receiver
1 x user manual
Guarantee: 1 year
Customers who bought this product also purchased...
|