|
|
The CineFlo
line of fluorescent fixtures from Cinelight Equipment is one of the
most common fluorescent light type used on big productions studios, in still
photography and movie pictures. The whole CineFlo line is designed to
make your life easier, to make you work faster and more accurate, and
take some of the guest work out of it.
The CineFlo fluorescent fixture provides soft, cool, flicker-free light
like a bounce-source, and has also the features to control the
intensity and spread of the light emitted, by using the built-in
barndoors and included louver or other accessories available from third
parties.
The fixture is designed so that, if the whole fixture is too bulky for
a particular application, the tubes, wiring harness, and reflector can
be quickly stripped out of the fixture and employed in any number of
configurations as needed. The fixtures are lightweight enough to tape
to a wall. The housing is made from polycarbonate and has reinforced
ends, making it resistant to the every day abuse on the set.
The lamps, being the most important component of this fixture, give
several color temperatures, primarily the daylight and tungsten. It is
very portable, and the lamps take almost no power so it is a very low
power consumption. When you’re on a location the beauty of using these
lights is that you can walk into a situation when you got a lot of daylight in
the room and you can lamp them daylight or you can get into a situation
when you’re working in a studio for the day so you can lamp them
tungsten.
The barndoors close for transport or for shipping and they protect the instrument; they open up and act as barndoors.
The louver will help you to control the spill. Because the light is so
soft and diffused, the light spreads out to vary wide beam. The louver
is attached using Velcro and can be pulled off completely.
The detachable lamp harness has 4 different individual cables, one to
each lamp and they’re shorten to the length and color labeled so that
each one only goes to one lamp. This way you won’t have any confusion
of what goes where.
The mounting system for the 4ft 4 bank is an omni-mount (MTP-K41) and
it’s called the universal mount because it is for the single, double
and 4 bank systems and that would be up to a 4ft size. The omni-mount
has four capture points and a secure lock pin. This mount is designed
to work on a grip head allowing you to position the fixture in
virtually any position. With the optional baby-receiver mount (MTP-B41)
you can get the grip head off and mount it directly on the top of the
stand.
The ballast is manufactured from high quality components with
performance and durability same as higher cost competitors. The
ballast is designed to operate the lamps at 24'000 Hz, 400 times faster
than traditional ballasts. The reason for that is that it is a very
high frequency and it keeps out of range of a normal 60 Hz pattern
which creates flicker, very critical when you’re shooting
films. Flicker free at any shutter speed.
The ballast has 4 separate switches to control each lamp individually
so you can adjust the light output without color shifting the lamps
color temperature (K).
CineFlo
Bank Select ballasts (four-bank and double-bank) feature an additional
high-output/standard-output toggle switch. Use the high-output setting
for 4-ft (75W) lamps and the standard setting for 2-ft (40W) lamps so
you can use the same ballast on 4FT fixtures and 2FT fixtures.
Includes an easy to change power fuse that protects the ballast against electrical shocks.
These instruments are truly the workhorses of the industry, for all
blue/green screen work all over the world, regardless if it is a motion
picture, commercial or any other field.
Components and accessories are fully compatible with Kino Flo brand.
CineFlo line offers the same light quality as higher priced competitors at a fraction of cost!
Key Features:
- provides sufficient output to serve as key light at moderate light levels, or as a soft fill at higher light levels.
- built for high impact work on location.
- ballast draws very little AC power
- 4 high output lamp fixture.
- built-in barndoors.
- removable lamp harness, reflector and louver.
- twist-on, locking center mount.
- compatible with G13 True Match® , Cinema 55" Daylight and Tungsten lamps.
- 4 bank selectable offering individual lamp control.
- dual mode switch select: high output (75W-4ft) and low output (45W-2ft).
- flicker-free: operates at 24'000 Hz, more than 400 times than a traditional ballast.
- operates full color spectrum (CRI>90RA, no green or blue spike)
- instant-on.
- dead quiet, no fans, no noise, low heat.
- strong lightweight housing made from polycarbonate material.
- external ballast and 7m power cable included.
- over voltage protection and easy to change power fuse.
Package content:
1 x 4ft 4lamp fixture
1 x reflector
1 x louver
1 x removable harness
1 x omni-mount system MTP-K41
1 x 7m power cable
1 x external 4 bank ballast - select
1 x user manual
Guarantee: 1 year
| source type |
fluorescent - flood |
| power |
300 watts |
| voltage |
230V |
| lamp type |
- |
| lamp socket |
G13 |
| color temperature |
3200K & 5600K |
| beam angle degree |
- |
| illuminance |
- |
| ballast |
external |
| ballast type |
electronic flicker Free |
| number of ballasts |
1 |
| ballast power |
4 X 35W / 45W / 75W |
| ballast frequency |
24000 Hz |
| ballast power factor |
0.98 |
| mounting |
lolipop twist-on plate w/ 3/8" pin |
| power cable lenght |
1.5 m power cable, 7.0 m ballast to lamp head |
| power plug type |
CEE 7/4 ( Schuko ) |
| lamp head dimmensions (HxWxL) mm |
1300 X 330 X 75 |
| ballast dimmensions (HxWxL) mm |
350 X 230 X 60 |
| weight |
1.7 kg |
| ballast weight |
- |
| material |
plastic - polypropylene |
| color |
black |
| protection class |
IP 21 |
| compliance |
CE, RoHS, ISO9001 |
CineFlo 4FT 4Bank - select
[LRX-CINEFLO4F4B]LRX-CINEFLO4F4B
779€
Review by Andrew Peter
Very good value for the money! I find the lollipop mount better designed than on other brands. The internal electronics from ballast are high quality and well organised in the board. Easy to replace individual bank ballast in case of failure without having to change the whole ballast = easy to service.
Review by Leonard Hortensia
Used for the pass year without any problems! Good investment and excellent price/quality ration. Just ordered some new lamps.
Review by Peter Stephan
First time I bought this light from their eBay.de shop and recently I've bought a second one because I'm satisfied with the quality and the versatility of this kind of fixture. The components (fixture, ballast or cable) can be crossed with those from Kino Flo with no problem. I use GE Cinema 55' lamps but can also work with Kino Flo True Match 4FT lamps.It is a very good alternative for those on low budget.
Review by Leonard Hortensia
I chose this light for the high output, portability and flexibility because no matter the situation you’re in, this fixture can adapt to it very easily. The greatest thing is that it has a low power consumption, you can lamp it with either daylight or tungsten tubes, depending the situation. It features high quality components and in fact it is quite a bargain, regarding the small amount to pay for such a great instrument, comparable to all well-known brands. Thx for a great deal! Leonard.
Displaying 1 to 4 (of 4 reviews)
The CineFlo
line of fluorescent fixtures from Cinelight Equipment is one of the
most common fluorescent light type used on big productions studios, in still
photography and movie pictures. The whole CineFlo line is designed to
make your life easier, to make you work faster and more accurate, and
take some of the guest work out of it.
The CineFlo fluorescent fixture provides soft, cool, flicker-free light
like a bounce-source, and has also the features to control the
intensity and spread of the light emitted, by using the built-in
barndoors and included louver or other accessories available from third
parties.
The fixture is designed so that, if the whole fixture is too bulky for
a particular application, the tubes, wiring harness, and reflector can
be quickly stripped out of the fixture and employed in any number of
configurations as needed. The fixtures are lightweight enough to tape
to a wall. The housing is made from polycarbonate and has reinforced
ends, making it resistant to the every day abuse on the set.
The lamps, being the most important component of this fixture, give
several color temperatures, primarily the daylight and tungsten. It is
very portable, and the lamps take almost no power so it is a very low
power consumption. When you’re on a location the beauty of using these
lights is that you can walk into a situation when you got a lot of daylight in
the room and you can lamp them daylight or you can get into a situation
when you’re working in a studio for the day so you can lamp them
tungsten.
The barndoors close for transport or for shipping and they protect the instrument; they open up and act as barndoors.
The louver will help you to control the spill. Because the light is so
soft and diffused, the light spreads out to vary wide beam. The louver
is attached using Velcro and can be pulled off completely.
The detachable lamp harness has 4 different individual cables, one to
each lamp and they’re shorten to the length and color labeled so that
each one only goes to one lamp. This way you won’t have any confusion
of what goes where.
The mounting system for the 4ft 4 bank is an omni-mount (MTP-K41) and
it’s called the universal mount because it is for the single, double
and 4 bank systems and that would be up to a 4ft size. The omni-mount
has four capture points and a secure lock pin. This mount is designed
to work on a grip head allowing you to position the fixture in
virtually any position. With the optional baby-receiver mount (MTP-B41)
you can get the grip head off and mount it directly on the top of the
stand.
The ballast is manufactured from high quality components with
performance and durability same as higher cost competitors. The
ballast is designed to operate the lamps at 24'000 Hz, 400 times faster
than traditional ballasts. The reason for that is that it is a very
high frequency and it keeps out of range of a normal 60 Hz pattern
which creates flicker, very critical when you’re shooting
films. Flicker free at any shutter speed.
The ballast has 4 separate switches to control each lamp individually
so you can adjust the light output without color shifting the lamps
color temperature (K).
CineFlo
Bank Select ballasts (four-bank and double-bank) feature an additional
high-output/standard-output toggle switch. Use the high-output setting
for 4-ft (75W) lamps and the standard setting for 2-ft (40W) lamps so
you can use the same ballast on 4FT fixtures and 2FT fixtures.
Includes an easy to change power fuse that protects the ballast against electrical shocks.
These instruments are truly the workhorses of the industry, for all
blue/green screen work all over the world, regardless if it is a motion
picture, commercial or any other field.
Components and accessories are fully compatible with Kino Flo brand.
CineFlo line offers the same light quality as higher priced competitors at a fraction of cost!
Key Features:
- provides sufficient output to serve as key light at moderate light levels, or as a soft fill at higher light levels.
- built for high impact work on location.
- ballast draws very little AC power
- 4 high output lamp fixture.
- built-in barndoors.
- removable lamp harness, reflector and louver.
- twist-on, locking center mount.
- compatible with G13 True Match® , Cinema 55" Daylight and Tungsten lamps.
- 4 bank selectable offering individual lamp control.
- dual mode switch select: high output (75W-4ft) and low output (45W-2ft).
- flicker-free: operates at 24'000 Hz, more than 400 times than a traditional ballast.
- operates full color spectrum (CRI>90RA, no green or blue spike)
- instant-on.
- dead quiet, no fans, no noise, low heat.
- strong lightweight housing made from polycarbonate material.
- external ballast and 7m power cable included.
- over voltage protection and easy to change power fuse.
Package content:
1 x 4ft 4lamp fixture
1 x reflector
1 x louver
1 x removable harness
1 x omni-mount system MTP-K41
1 x 7m power cable
1 x external 4 bank ballast - select
1 x user manual
Guarantee: 1 year
Customers who bought this product also purchased...
|
![CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]](bmz_cache/1/114da0642517282d24da67d722a04337.image.350x275.jpg "CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]")
![CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]](bmz_cache/2/284cb7ab81875bde4260d0eaf8095b55.image.66x51.jpg "CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]")
![CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]](bmz_cache/6/61bc610381bca65eef4eea814af575fe.image.66x51.jpg "CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]")
![CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]](bmz_cache/d/dcb3be1a5c924f87c40a5da1aac12b21.image.66x51.jpg "CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]")
![CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]](bmz_cache/0/04818e5a45f103acdbd91f151d564d95.image.66x51.jpg "CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]")
![CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]](bmz_cache/3/3a2ee313dad1aa574284b78c2268f337.image.66x51.jpg "CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]")
![CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]](bmz_cache/8/8022f5448f7d083147ffc2827eb6f9a1.image.66x51.jpg "CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]")
![CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]](bmz_cache/f/f656ad13fd88383562f770dacd2e4d58.image.66x51.jpg "CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]")
![CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]](bmz_cache/d/daddc766deded858963a68f86b1be78c.image.66x51.jpg "CineFlo 4FT 4Bank - select [LRX-CINEFLO4F4B]")
