led accessories Hot shoe tilting bracket with 1/8" thread on the bottom and 1/8" connection screw. Tilting angle to approx 45 degree in both directions. Hot shoe to light stand adapter, allowing to mount a camera light using the hot shoe mounting system on a light stand with 16 mm (5.8" spigot). Support base for hot shoe mount devices allowing to place a camera light or flash on flat surface. Articulated Israeli CineArm made from high grade aluminum alloy with 1/4" screws at both ends and removable shoe mount to attach it on camera. Can be used to sustain LED lights or small LCD monitors. Length: 19.5 cm Articulated Israeli CineArm made from high grade aluminum alloy with 1/4" screws at both ends and removable shoe mount to attach it on camera. Can be used to sustain LED lights or small LCD monitors. Length: 28 cm Flexible arm with metal clamp for LEDPAD 200 led light. Allows mounting the light to flat surfaces and position it virtually any direction. A very handy accessory to have for LEDPAD 200. "T" support bar for CamLED lights. Made from aluminum alloy, black powder coated with two hot shoe mounts for mounting two lights and one "male" hot shoe to mount the support bar on a camera or other device with hot shoe mount receiver. The bar is made from 3... "T" support bar for CamLED lights for mounting two camera lights on a light stand. Made from aluminum alloy, black powder coated with two 1/4 " screws side adjustable and one middle 1/4" thread. 28 cm wide. 4 leaf metal barndoors for LED Panel 1x1 Bi-Focus and Bi-Color models only. Support bar in "T shape" for DayLED 600. Allow to mount up to 4 panels on a light stand resulting in a 2x2 configuration. Handy when need to create one large source by grouping multiple panels (2/3/4). The bar is made from strong aluminum and black powder coated. Has 4 male... Support bar in "T shape" for DayLED 900. Allow to mount up to 4 panels on a light stand resulting in a 2x2 configuration. Handy when need to create one large source by grouping multiple panels (2/3/4). The bar is made from strong aluminum and black powder coated. Has 4 male... Support bar in "T shape" for DayLED 1200. Allow to mount up to 4 panels on a light stand resulting in a 2x2 configuration. Handy when need to create one large source by grouping multiple panels (2/3/4). The bar is made from strong aluminum and black powder coated. Has 4 male... This soft canvas bag is an light and compact transport bag for DayLED 600. This is a good accessory for your LED fixture, indispensable for location assignments. The soft, thin profile facilitates storage and shipping, also designed for comfort and durability. At the interior there are two... This soft canvas bag is an light and compact transport bag for DayLED 900. This is a good accessory for your LED fixture, indispensable for location assignments. The soft, thin profile facilitates storage and shipping, also designed for comfort and durability. At the interior there are two... This soft canvas bag is an light and compact transport bag for DayLED 1200. This is a good accessory for your LED fixture, indispensable for location assignments. The soft, thin profile facilitates storage and shipping, also designed for comfort and durability. At the interior there are two... Dedicated transport case for LED Panel 1x1. Can fit the LED Panel 1x1 with power supply, cables, barndoors and filters. The case walls are reinforced for better protection and the top handle makes it easy to carry as a briefcase. At the interior the case compartments are made from... Wired Dimmer for DayLED that allows to adjust the brightness from the ground when the fixture is hanged or mounted high on a stand. The dimmer adjusts the output from 100% down to 10%. Connection between dimmer and DayLED fixtures is made via remote port located on the back panel. Compatible... Wireless Radio Dimmer for DayLED lights. This accessory allows you to adjust the brightness of the DayLED fixtures from a distance up to 15m. The package includes wireless radio receiver and radio remote. One remote can control up to 4 independent receivers. Each receiver can be set on up to... External power supply adapter for CamLED and other types of camera LED lights which use SONY NP-F type batteries and NP-L. Can be used to power a LED light when the dedicated batteries run out of power and an external power source is available (wall power socket). Also suitable as a... Battery adapter with SONY NP-F mount which uses 6 AA batteries to power a LED light with compatible mount. Can work with: CamLED 160CamLED 144 HOCamLED 144 HO V2CamLED 144 Bi-ColorCamLED 209 HOCamLED 209 Bi-ColorCamLED 312 HOCamLED 312 Bi-ColorCamLED 10 HOCool LED 256 ... and any other LED... Li-Ion battery with Sony DV mount (NP-F550) with capacity 26.4Wh (2200mAh) - 7.4V and AC charger worldwide voltage compatible (100V-240V). The battery can be used to power Sony camcorders or camera LED lights like our CamLED or any other brand with Sony DV mount. The charger can be... Li-Ion high capacity battery with Sony type mount for camera LED lights and professional Sony handheld camcorders. Made from high quality Sanyo cells. Capacity: 50Wh Voltage: 7.48V Working temperature: - 20C to + 55C Dimensions: 155mm x 97mm x 55 mm Weight: 280g Mount: Sony DV (NP-F970) ... V-Lock Battery 130Wh 14.8V for LED panels and professional camcorders. Made from high quality Sanyo cells. Capacity: 130Wh Voltage: 14.8V Working temperature: - 20C to + 55C Dimensions: 155mm x 97mm x 55 mm Weight: 650g Battery level meter: 4 LED's Mount: V-Mount D-Tap connector DC output... V-Lock Battery 160Wh 14.8V for LED panels and professional camcorders. Made from high quality Sanyo cells. Capacity: 160Wh Voltage: 14.8V Working temperature: - 20C to + 55C Dimensions: 155mm x 97mm x 55 mm Weight: 850g Battery level meter: 4 LED's Mount: V-Mount D-Tap connector DC output... V-Lock Battery 230Wh 14.8V for LED panels and professional camcorders. Made from high quality Sanyo cells. Capacity: 230Wh Voltage: 14.8V Working temperature: - 20C to + 55C Dimensions: 155mm x 97mm x 55 mm Weight: 1300g Battery level meter: 4 LED's Intelligent control circuit. Current and... Universal battery adapter from AA to 7.4V and 14.8 (switch selectable). Allow to mount up to 12 AA battery inside the internal compartment. For 7.4V - 6 AA batteries are required to be installed and for 14.8V 12 AA batteries are required. This adapter is equipped with a belt clip. ... This flight case with aluminum chassis and walls of plywood offers a higher protection to equipment during transportation on location. Interior is padded with protective foam for extra protection. Removable longitudinal pads are included to divide the main compartment. The case can... This flight case with aluminum chassis and walls of plywood offers a higher protection to equipment during transportation on location. Interior is padded with protective foam for extra protection. Removable longitudinal pads are included to divide the main compartment. The case can... This flight case with aluminum chassis and walls of plywood offers a higher protection to equipment during transportation on location. Interior is padded with protective foam for extra protection. Removable longitudinal pads are included to divide the main compartment. The case can... Single channel Li-Ion traveler charger for Sony DV type battery. Features: - Compact design, easy to carry. - Status LED and charging level LED. - Compatible with all DV batteries (all brands), Sony dv mount. - Worldwide compatible : 100-240V 50/60Hz. - Output: DC 4.2V (8.4V) -... Single charger for Lithium-Ion V-Lock and Anton Bauer batteries. Input voltage: AC 100V-260V (worldwide compatible) Output voltage: 16.8V Current: 2A Working temperature: -20C to +55C Dimensions: 120mm x 68mm x 36mm Weight: 380g Housing: plastic Charging is made via a round DC connector This charger is designed to recharge two V-Mount type Li-ion batteries simultaneously. The camera can be powered directly via DC Output connector. Offers a built-in regulated 70 watts 14.8 VDC output power supply via a 4-Pin XLR connector, eliminating the need for a separate power supply. Auto... Acrylic filter set for LED Panel 1x1. Includes: diffusion filter panel and warm filter panel.Approx dimension: 30.5 x 30.5 x 0.3 cm External V-Mount battery plate. Allows to power light sources or other devices which are compatible with 14.8V DC input (cylindrical notebook style connector). Cable length is 1.5m. Can be paired with DayLED 600 / 900 / 1200 / LED 1x1 - Spot. Can be attached to the central column of... External Anton Bauer battery plate. Allows to power light sources or other devices which are compatible with 14.8V DC input (cylindrical notebook style connector). Cable length is 1.5m. Can be paired with DayLED 600 / 900 / 1200 / LED 1x1 - Spot. Can be attached to the central... Supply power to LED lights directly from a V-Lock battery or Anton Bauer battery via the D-Tap connector from the battery. Cable length: 30cm. Monthly Specials For May |
add to compare
www.cinelight.com - Professional Video & Film Lighting Equipment | Prices excl. VAT.
We dont charge VAT for clients having a valid EU VAT ID and for clients outside EU.